LBNL Masthead A-Z IndexBerkeley Lab mastheadU.S. Department of Energy logoPhone BookJobsSearch
Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print

 

NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination of the first samples. Adding to recent advances in cometary science showing the important role played by mixing of materials in the accretion disk where the planets of the Solar System had their birth, the first round of Stardust results suggests that the mixing started earlier in the planetary formation process and is more extensive than previously thought.

Cometary Clues to Solar System Formation

Comets are widely believed to be the repositories of the building blocks of the Solar System. Astronomers theorize that presolar dust clouds, perhaps after nudging by an outside shockwave, gradually collapsed under their own gravity to form a glowing star surrounded by an accretion disk, where protoplanets took shape. In them the constituents of the dust were subjected to heat and pressure and reactions with water, leading ultimately to the formation of planets. But comets that formed far from the Sun are believed to have preserved the original constituents of the Solar System in relatively unaltered form.

In January 2006, the sample return capsule from NASA's $200-million, seven-year-long Stardust mission to Comet 81P/Wild 2 parachuted to the Utah desert delivering the first solid samples from space since the 1970s moon missions. Hundreds of scientists and dozens of experimental techniques in facilities around the world contributed to the preliminary examination of the first samples. Four ALS beamlines and the researchers using them contributed to many of the findings that are shedding new light on how the Solar System was formed. The Stardust results show that the mixing of materials throughout the disk started earlier in this process and was more extensive than previously thought.

Materials brought back from a known extraterrestrial source, such as the Apollo samples from the Moon in the 1970s, provide critical clues to the history of the Solar System and interpretation of extraterrestrial samples like meteorites and cosmic dust particles. Stardust's success depended on two technical achievements, a trajectory allowing it to pass within 240 km of the comet’s nucleus at a speed of just 6 km/s and a special low-density material called aerogel molded into a collector grid. Particles were brought to a standstill as they penetrated into the aerogel with limited heating or alteration. Thousands of tiny particles, typically leaving carrot-shaped tracks, were trapped, most of them smaller than 10 micrometers in size.

Tracks left by two comet particles after they struck the Stardust spacecraft's comet dust collector. The collector is made up of a low-density glass material called aerogel. Scientists have begun extracting comet particles from these and other similar tadpole-shaped tracks. Image credit: NASA/JPL-Caltech/University of Washington.

After its launch in 1999, Stardust reached the comet in 2004, then returned its precious cargo to Earth in a capsule on January 15, 2006. At NASA's Johnson Space Flight Center in Houston, a few of the captured particles were quickly distributed for inspection by Preliminary Examination Teams (PETs). At the ALS, measurements were made at four beamlines. "Keystones" of aerogel, wedges containing complete tracks and the terminal particles at their tips, were first removed under the microscope using computer-driven micromanipulators that sliced the aerogel with glass needles.

X-ray absorption near-edge structure (XANES) yields a distinctive spectral signature for each chemical constituent in a sample and is particularly useful for identifying organic compounds. At Beamline 5.3.2 and Beamline 11.0.2, it was possible to combine this technique with the scanning transmission x-ray microscope (STXM) to image the spatial distribution of the compounds.

 

Some particle tracks (top left) revealed shedding of organic compounds and their diffusion into the surrounding aerogel. The spectra (top right) show the intensities of a methylene group peak on and off the track. Peak distribution is mapped in the false color image. Intensity is greatest in and near the track, but methylene is present in the aerogel over 100 micrometers away. Image credit: S. Bajt, Lawrence Livermore National Laboratory.

Initially it was planned to do infrared (IR0 microspectroscopy at Beamline 1.4.3 only on the terminal particles, concentrating primarily on the silicates in those particles. But because the aerogel slowed the particles relatively gently, team members were also able to capture volatile organics along most of the length of the track, building up a two-dimensional image of the different organics at different stages of entry.

Minerals were the main target of studies at Beamline 10.3.2. The team used a combination of three techniques for mapping the bulk chemistry and mineralogy of the Wild 2 samples. In x-ray fluorescence, one obtains an elemental map. By means of XANES and the related technique of extended x-ray absorption fine structure, or EXAFS, one can also determine the atomic environment of specific elements. X-ray diffraction yields the crystalline structure of minerals.

 

The calcium problem: which spots from x-ray microfluroescence maps are really from the comet? Left: Large, bright spots outside the track in this calcium map are contaminants in the aerogel. Right: In this higher-magnification image, Ti is mapped in red, Mn in green, and Ca in blue. Thus, the bright blue spot (particle 1 in the track) contains Ca and little or no Mn or Ti, so it is aerogel contaminant, whereas the greenish spot (particle 2 also in the track) contains all three elements, which is typical of minerals formed at high temperature in the inner Solar System. Image credit: Matthew Marcus, ALS.

In all, the Wild 2 samples proved to be highly variable. Some contained minerals supposedly formed only near a star or in some other high-temperature environment. One such sample contained aluminum-titanium-calcium-rich minerals similar to those found in inclusions in the Allende meteorite. From this tangle, the picture that emerged is of cometary particles containing primarily silicate materials formed within the Solar System, including some grains born in the high temperatures existing only close to the Sun. These particles then were carried to the outer reaches of the Solar System, the Kuiper belt region outside Neptune’s orbit, where they were incorporated into Comet Wild 2 along with organic compounds and other volatile materials.

 



Research conducted by members of the Stardust Preliminary Examination Team.

Research funding: Research funding: U.S. National Aeronautics and Space Administration and other institutions supporting the members of the Stardust Preliminary Examination Team. Operation of the ALS is supported by the U.S. Department of Energy, Office of Basic Energy Sciences (BES).

Publications about this research: D. Brownlee et al., “Comet 81P/Wild 2 under a microscope,” Science314, 1711 (2006); S.A. Sandford et al., “Organics captured from Comet 81P/Wild 2 by the Stardust spacecraft,” Science 314, 1720 (2006); L.P. Keller et al., “Infrared spectroscopy of Comet 81P/Wild 2 samples returned by Stardust,” Science 314, 1728 (2006); G.J. Flynn et al., “Elemental compositions of Comet 81P/Wild 2 samples collected by Stardust,” Science 314, 1731 (2006).